Guide to coating grades and applications
Introduction to glass coating grades
 | |
|---|---|
| A standard grade to be used for livestock sewage storage. It can be used for storage of crop or less invasive waste as well. | |
| pH | pH4 - 9 |
| Manufacturing | Spray × 2, Sinter × 1 |
| Enamel thickness | 180～360μm |
| Electric conductivity test | 9Ｖ |
| Hollow condition | AWWA D103-97 -section 10.4 |
| Quality condition | EEA7.24 & 7.25 BS7793-1 |
 | |
|---|---|
| An industrial grade to be used for bulk solid, rainwater, filtration tank and sewage storage. It offers high safety and protection in lowest cost. | |
| pH | pH3～9 |
| Manufacturing | Spray × 2, Sinter × 1 |
| Enamel thickness | 200 - 360μm |
| Electric conductivity test | 700Ｖ |
| Hollow condition | AWWA D103-97 -section 10.4 |
| Quality condition | EEA7.20 or above EN ISO 28765: 2016* |
|
|
|---|---|
| Suitable for usage under severe condition such as industrial wastewater and sewage digestion. In addition to severe 1100V zero electric conductivity, enamel layer is additionally equipped. | |
| pH | pH2 - 11 |
| Manufacturing | Spray × 3, Sinter × 2 |
| Enamel thickness | 280 - 460µm |
| Electric conductivity test | 1100Ｖ |
| Quality condition | EEA7.20 or above EN ISO 28765: 2016* |
 | |
|---|---|
| A high level grade beyond TRIFUSION. It can be used at most of severe environment. Zero electric conductivity at 1500V is qualified so it corresponds to corrosive agent and high temperature process. | |
| pH | pH1 - 14 |
| Manufacturing | Spray × 3, Sinter × 2 |
| Enamel thickness | 340 - 500µm |
| Electric conductivity test | 1500V |
| Quality condition | EEA7.20 or above EN ISO 28765: 2016* |
*Remarks :
EN ISO 28765: 2016 glass and porcelain enamel. Bolt assembly for the purpose of storage of water, drainage, industrial wastewater and sewage. Bolt assembly steel panel design covers glass coating condition and tank structural design. It is a standard specially certified for glass adhesion steel panel used for water and wastewater.
Zero electric conductivity policy is applied to ISOFUSION V700, TRI FUSION and TRI FUSION PLUS. All application needs consideration of concentration and temperature. All specification is related to only contact surface.
Glass coating application guide
| Applications | ECO FUSION |
ISO FUSION V700 |
TR1 FUSION |
TR1 FUSION PLUS |
Inner color |
|---|---|---|---|---|---|
| Livestock sewage | ◯ |
|
|
|
|
| Edible oil/Plant oil | 〇 |
|
|
|
|
| Dried coarse grained solid |
|
◯ |
|
|
|
| Fermentation tank at farm |
|
◯ |
|
|
|
| Rainwater/Extinguish water |
|
◯ |
|
|
|
| Potable water (ANSI/NSF61) |
|
◯ |
|
|
|
| Filtration tank |
|
◯ |
|
|
|
| Sewage storage (without roof) |
|
◯ |
|
|
|
| Sewage storage (without roof) |
|
◯ |
|
|
|
| Sewage mid-temp fermentation tank (within liquid) |
|
◯ |
|
|
|
| Potable water (DWI, Reg31 certified) |
|
◯ |
|
|
|
| Sewage reversed wastewater |
|
◯ |
|
|
|
| Sewage cake storage |
|
◯ |
|
|
|
| Basements/Semi-basement |
|
◯ |
|
|
|
| Glass adhesive panel floor |
|
◯ |
|
||
| Sewage storage (with roof) |
|
◯ |
|
||
| Sewage storage (with roof) |
|
◯ |
|
||
| Industrial wastewater/Aeration process |
|
◯ |
|
||
| Food processing cleaning water |
|
◯ |
|
||
| Microbe in liquid |
|
◯ |
|
||
| Sewage mid-temp fermentation tank (Upper part and roof) |
|
◯ |
|
||
| High temp fermentation tank (within liquid) |
|
◯ |
|
||
| High temp fermentation tank (Upper part and roof) |
|
◯ |
|
||
| High temp application |
|
◯ | |||
| Corrosive/Chemical agent industrial wastewater |
|
◯ |
Outer color
Other outer color is available.
All color identification number is approximately.
All outer surface of glass is adhesion glass status.