Finishing surface cleaning of precision machine parts (substitute to ultrasonic)

For finish cleaning after surface treatment of precision parts manufacturing, ultrasonic cleaning system (machine) is generally used.
However, ultrasonic is a kind of wet cleaning so that it is not adequate for fine structure and it has essential problem of effluent treatment.

Cleaning of ceramics (bulk, splayed) removed powder, fine contamination such as sand blasted powder etc.
Cleaning of deep and narrow part of subject which has small hole and slit structure.

nventional method of finish cleaning after surface treatment.

	Method	Issues
Dry cleaning	UV/Ozone Plasma cleaning Laser cleaning	Initial cost, ROI, Place of installation, Effluent treatment etc.
Wet cleaning	Bruch scrub High pressure jet Ultrasonic etc.

Our dry ice blast cleaner "SUPERBLAST" realizes precise finishing without producing effluent!

Practical application of dry ice blast cleaner "SUPERBLAST"...

Example of optimized cleaning of particle and small hole which is unable to be perfectly cleaned by chemical.

Alumina part

Before cleaning

After chemical cleaned

After cleaning
by SUPERBLAST

Part with small through halls

Before cleaning

After chemical cleaned

After cleaning
by SUPERBLAST

Merit as a result

By changing cleaning mode of vacuum equipment parts from chemical, reduction of dummy runtime was achieved and it led to reduction of re-setup time of production line.

Our original dry ice blast cleaning system "SUPERBLAST" enables removal of remained particles on surface of fine ceramics and deep/narrow part (small hall, slit) of shower plate by applying unique method to blast crushed powder dry ice.

Also it reduces troublesome labor and cost for effluent treatment!

検索用入力欄

記入時注意事項

テーブルの行列は変更しないでください。
分類が複数ある場合は、| ←半角の縦棒で区切って連続で入力してください。
また、区切り文字の前後に空白は入れないでください。

製品分類1	Precision Cleaning / Dryice blast
製品分類2	Cleaning service
プロセス分類	Volume production\|Process & Equipment
サムネイル画像
説明文
リダイレクトURL